Fault diagnosis
K60 ABS FAILURE WARNING LIGHT ON
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
The warning light comes on and stays on with the key on.
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Connect the diagnostic test equipment to the tester input.Check:
| Move on to Step | 1. Error detected in the control unit | 1. Continue following the instructions for the diagnostic equipment | |
| 2. No communication with the control unit | 2. Restore the connection between the ABS control unit and the diagnostic connector See E4010 INSTRUMENT PANEL | |||
| 2 | INSTRUMENT PANEL SUPPLY CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the connection between ABS control unt and instrument panel See E4010 INSTRUMENT PANEL | Move on to Step | 1. Connections not correct | 1. Repair the connections | |
| 2. Instrument panel inefficient | 2. Replace instrument panel Op. 5560B10 ANALOGUE CONTROL PANEL - R+R | |||
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | ||||