Fault diagnosis
K61 ABS WARNING LIGHT OFF / (DO NOT CARRY OUT INITIAL TEST)
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
The ABS warning light does not come on at key on (it should come on for 3 seconds to indicate that the initial control unit test has been carried out, and then go off)
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Connect the diagnostic test equipment (Examiner or other instruments) to the tester input.Check that the tester is in proper communication with the ABS control unit | Move on to Step | 1. No communication with the control unit | 1. Restore:
| |
| 2. Error detected in the control unit | 2. Continue following the instructions for the diagnostic equipment | |||
| 3. ABS control unit faulty | 3. Change the ABS control unit | |||
| 2 | INSTRUMENT PANEL CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the condition of the ABS warning light in the instrument panel See E4010 INSTRUMENT PANEL | Move on to Step | Instrument panel not working | Replace instrument panel Op. 5560B10 ANALOGUE CONTROL PANEL - R+R | |