Fault diagnosis
K062 ABS AND HANDBRAKE WARNING LIGHTS BOTH ON
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
With the ignition, the ABS warning light and the handbrake warning light come on simultaneously and stay on for longer than 3 seconds (both warning lights should go off after the initial control unit test)
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Connect the diagnostic test equipment (Examiner or other instruments) to the tester input.Check that there are no faults in the ABS control unit. | Move on to Step 2 | 1. Error detected in the control unit | 1. Continue following the instructions for the diagnostic equipment | |
| 2. No communication with the control unit | 2. Restore the connection between the ABS control unit and the diagnostic connector | |||
| 2 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis |