Procedures
1008C32 GEARBOX LOWER REACTION ROD ' -R.R.
Engines: 2.0 JTD 8V
Removing
- Position the vehicle on a lift. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the bolt fixing the lower reaction rod to the suspension crossmember.2. Undo the bolt fixing the lower reaction rod to the mounting bracket on the gearbox.- Move the power unit slightly forward to make enough room to get the reaction link out.3. Remove the lower reaction link.
Engines: 2.0 JTD 8V
Refitting
- Fit the lower reaction rod in the housing and tighten the bolt fixing the suspension crossmember to torque.- Tighten the nut fixing the reaction rod to the gearbox to torque. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.Engines: 2.0 16V
Removing
- Position the vehicle on the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the bolt fixing the lower reaction rod to the suspension crossmember.2. Undo the bolt fixing the lower reaction rod to the mounting bracket on the gearbox.- Move the power unit slightly forward to make enough room to get the reaction link out.3. Remove the lower reaction link.
Engines: 2.0 16V
Refitting
- Fit the lower reaction rod in the housing and tighten the bolt fixing the suspension crossmember to torque.- Tighten the nut fixing the reaction rod to the gearbox to torque. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.Engines: 2.3 JTD 16V
Removing
- Position the vehicle on a lift. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Unscrew the bolt securing the lower reaction link to the suspension beam.2. Unscrew the bolt securing the lower reaction link to the anchorage bracket on the gearbox.- Move the power unit slightly forward to make enough room to get the reaction link out.3. Remove the lower reaction link.
Engines: 2.3 JTD 16V
Refitting
- Fit the lower reaction link in its seat and tighten the bolt securing it to the suspension beam to torque. | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | - | Bolts | LOWER LINK ON GEARBOX | - |