1020D40 FLYWHEEL END OIL SEAL- R+R WITH FLYWHEEL REMOVED

Engines: 2.3 JTD 16V

Removing

Refitting

1. Use the tool described below to fit the oil sealing ring.2. Position the tool extraction pincers (2a) into oil sealing ring grooves (2b).3. Secure the extraction pincers in position using retaining bolts.4. Tighten the tool pin to remove the oil sealing ring from its seat.

	Description	Code	Function
1	Extractor	99340058	Front cover gasket removal

Engines: 2.3 JTD 16V

Refitting

Removing

1. Use the tool described below to fit the oil sealing ring.2. Apply plate (2a) to the crankshaft and secure using retaining bolts (2b).- Position the new oil sealing ring in its seat3. Position fitting tool (3) in contact with the oil sealing ring and tighten into nut (3b) to fully fit the oil seal into its seat on the crankshaft.

	Description	Code	Function
1	Fitting tool	99346255	Flywheel end crankshaft seal fitting

Engines: 2.0 16V

Removing

Refitting

- Release the oil seal from the housing taking care not to scratch it.

Engines: 2.0 16V

Refitting

Removing

1. Replace the oil seal (1a) in the housing using the special fitting tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.806.000	Fitting flywheel side oil seal

Engines: 2.0 JTD 8V

Removing

Refitting

- Remove the oil seal from the housing taking care not to bend it or damage the housing.

Engines: 2.0 JTD 8V

Refitting

Removing

1. Fit a new oil seal (1a) using the tool (1b).

	Description	Code	Function
1b	Fitting tool	1.860.806.000	Fitting crankshaft rear oil seal