Procedures
1028H58 CONNECTING ROD SMALL END BUSH - REPLACE
Engines: 2.8 JTD 8V
Removing
1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c). | Description | Code | Function |
|---|---|---|---|
| 1c | Fitting tool | 1.860.624.000 | Small end bush removal/introduction |
Engines: 2.8 JTD 8V
Refitting
1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c). | Description | Code | Function |
|---|---|---|---|
| 1c | Fitting tool | 1.860.624.000 | Small end bush removal/introduction |
Engines: 2.8 JTD 8V
- Ream the inner diameter of the small end bush to the recommended figure.
 | Subject | Value |
|---|---|---|
| . | Engine connecting rod small end bush | mm |
| - | Inner diameter | 32,010 - 32,020 |