Procedures

1036H14 VALVE TAPPETS - CHECK CLEARANCE

Engines: 2.0 16V, 2.8 JTD 8V

Engines: 2.0 16V

See in Op. 1016A201. Position each cam facing upwards and check that the clearance corresponds to the recommended values.

	Subject	Value
1	VALVE TAPPETS	mm
-	Inlet valve clearance check	0,15 - 0,25
-	Exhaust valve clearance check	0,35 - 0,45

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

Removing

Refitting

See in Op. 1016A10 See in Op. 1016A20 Op. 4450B04 RIGHT FRONT WHEEL R R1. Using a feeler gauge (1a), measure the clearance (1b) between the camshaft lift and a tappet shim.- Rotate the camshaft and check the clearance for all the tappets working on the crankshaft pulley.

	Subject	Value
.	TAPPET SHIM	mm
-	Inlet valves clearance in closed position	0.45 - 0.55
-	Exhaust valves clearance in closed position	0.45 - 0.55

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

Refitting

Removing

Op. 4450B04 RIGHT FRONT WHEEL R R See in Op. 1016A20 See in Op. 1016A10