FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1036H55 HYDRAULIC TAPPET (ONE) - REPLACE WITH CAMSHAFT HOUSING REMOVED

Engines: 2.0 JTD 8V, 2.3 JTD 16V
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
1. Release the rocker arm (1a) from the housing in the cylinder head, release the tappet and, acting on the spring (1b), remove the hydraulic tappet (1c).- The hydraulic tappet automatically cancels the valve clearance whilst the engine is running.- The cancelling of the valve clearance ensures that the start of the opening of each valve is at exactly the correct moment in the cycle.
Manual illustration 244002510
Engines: 2.3 JTD 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the new tappet in the rocker arm housing and fasten it using a new securing spring.- Fit the tappet - rocker arm assembly in the housing in the cylinder head.
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
1. Release the rocker arm (1a) complete with hydraulic tappet (1b) from the housing in the cylinder head.- Separate the tappet from the rocker arm at the bench.- The hydraulic tappet automatically cancels the valve clearance whilst the engine is running.- The cancelling of the valve clearance ensures that the start of the opening of each valve is at exactly the correct moment in the cycle.
Manual illustration 244002511
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the new tappet in the rocker arm housing and fasten it using a new securing spring.- Fit the tappet - rocker arm assembly in the housing in the cylinder head.