FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1040A14 FUEL TANK - R + R FOR REPLACEMENT

Engines: 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1040A101. Undo the fixing bolts (1a) and remove the ring nut (1b).
Manual illustration 244002602
Engines: 2.3 JTD 16V
1. Raise the submerged pump, release the perimeter seal (1a) from its housing, then remove the fuel pump (1b) complete with level gauge.
Manual illustration 244002603
Engines: 2.3 JTD 16V
1. Open the band (1a) and remove the hose joining the filler pipe and the tank (1b).
Manual illustration 244002604
Engines: 2.3 JTD 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the hose joining the filler pipe and the tank.- Position the fuel pump, complete with new gasket, in its housing in the tank.- Tighten the nuts fixing the fuel pump ring nut to the tank. See in Op. 1040A10 Op. 7055B54 UNDER-ENGINE GUARD - R R
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1040B62 See in Op. 1040A101. Undo the fixing bolts (1a) and remove the ring nut (1b).
Manual illustration 244002605
Engines: 2.0 JTD 8V
1. Raise the submerged pump, release the perimeter seal (1a) from its housing, then remove the fuel pump (1b) complete with level gauge.
Manual illustration 244002606
Engines: 2.0 JTD 8V
1. Open the band (1a) and remove the hose joining the filler pipe and the tank (1b).
Manual illustration 244002607
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the hose joining the filler pipe and the tank.- Position the fuel pump, complete with new gasket, in its housing in the tank.- Tighten the nuts fixing the fuel pump ring nut to the tank. See in Op. 1040A10 See in Op. 1040B62 Op. 7055B54 UNDER-ENGINE GUARD - R R
Engines: 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1040B62 See in Op. 1040A101. Undo the fixing bolts (1a) and remove the ring nut (1b).
Manual illustration 244002608
Engines: 2.8 JTD 8V
1. Raise the submerged pump, release the perimeter seal (1a) from its housing, then remove the fuel pump (1b) complete with level gauge.
Manual illustration 244002609
Engines: 2.8 JTD 8V
1. Open the band (1a) and remove the hose joining the filler pipe and the tank (1b).
Manual illustration 244002610
Engines: 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the hose joining the filler pipe and the tank.- Position the fuel pump, complete with new gasket, in its housing in the tank.- Tighten the nuts fixing the fuel pump ring nut to the tank. See in Op. 1040A10 See in Op. 1040B62 Op. 7055B54 UNDER-ENGINE GUARD - R R