- Disconnect the negative battery terminal.1. Undo the fixing bolts (1a) and remove the passenger compartment carpet (1b).
Engines: 2.3 JTD 16V
1. Undo the fixing bolts.2. Remove the submerged pump housing protective cover.
Engines: 2.3 JTD 16V
1. Disconnect the fuel supply pipes from the rapid connector.
Engines: 2.3 JTD 16V
- Raise the vehicle. Op. 7055B54 UNDER-ENGINE GUARD - R R- Release the supply pipe from the fastenings springs and release the pipe from the tank.- Lower the lift. See in Op. 1048A101. Disconnect the supply pipe from the fuel filter.- Release it from the securing bands on the bulkhead.2. Remove the single fuel supply pipes from the upper part of the engine compartment.
- Fit the single fuel supply pipes in the upper part of the engine compartment.- Connect the supply pipe to the fuel filter.- Fasten it to the securing bands on the bulkhead. See in Op. 1048A10- Raise the lift.- Position the supply pipe in the housing on the tank passing it between the bodyshell and the tank.- Fasten the pipe to the springs on the underbody. Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle.- Working from inside the passenger compartment, connect the supply pipe to the rapid connector on the pump.- Fit the submerged pump housing protective cover.- Fit the passenger compartment carpet and fasten it to the bodyshell using the fixing bolts.- Connect the negative battery terminal.
- Disconnect the negative battery terminal.1. Undo the fixing bolts (1a) and lift up the passenger compartment carpet (1b).
Engines: 2.0 JTD 8V
1. Undo the fixing bolts.2. Remove the protective cover for the submerged pump housing.
Engines: 2.0 JTD 8V
1. Disconnect the fuel supply pipes from the rapid connector.
Engines: 2.0 JTD 8V
- Raise the vehicle. Op. 7055B54 UNDER-ENGINE GUARD - R R- Release the supply pipe from the fastening springs and release the pipe from the tank.- Lower the lift. See in Op. 1048A101. Disconnect the supply pipe from the fuel filter.- Release it from the fastening bands on the bulkhead.2. Remove the single fuel supply pipes from the upper part of the engine compartment.
- Fit the single fuel supply pipes in the upper part of the engine compartment.- Connect the supply pipe to the fuel filter.- Secure it to the fastening bands on the bulkhead. See in Op. 1048A10- Raise the lift.- Position the supply pipe in the housing in the tank passing it between the bodyshell and the tank.- Fasten the pipe to the springs on the underbody. Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle.- Working from inside the passenger compartment, connect the supply pipe to the rapid connector on the pump.- Fit the protective cover for the submerged pump housing.- Fit the passenger compartment carpet and fasten it to the bodyshell using the fixing bolts.- Connect the negative battery terminal.
- Disconnect the negative battery terminal.1. Undo the fixing bolts (1a) and lift up the passenger compartment carpet (1b).
Engines: 2.8 JTD 8V
1. Undo the fixing bolts.2. Remove the protective cover for the submerged pump housing.
Engines: 2.8 JTD 8V
1. Disconnect the fuel supply pipes from the rapid connector.
Engines: 2.8 JTD 8V
- Raise the vehicle. Op. 7055B54 UNDER-ENGINE GUARD - R R- Release the supply pipe from the fastening springs and release the pipe from the tank.- Lower the lift. See in Op. 1048A101. Disconnect the supply pipe from the fuel filter.- Release it from the fastening bands on the bulkhead.2. Remove the single fuel supply pipes from the upper part of the engine compartment.
- Fit the single fuel supply pipes in the upper part of the engine compartment.- Connect the supply pipe to the fuel filter.- Secure it to the fastening bands on the bulkhead. See in Op. 1048A10- Raise the lift.- Position the supply pipe in the housing in the tank passing it between the bodyshell and the tank.- Fasten the pipe to the springs on the underbody. Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle.- Working from inside the passenger compartment, connect the supply pipe to the rapid connector on the pump.- Fit the protective cover for the submerged pump housing.- Fit the passenger compartment carpet and fasten it to the bodyshell using the fixing bolts.- Connect the negative battery terminal.
