FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1040B54 FUEL LINE FROM MANIFOLDS - R R

Engines: 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Raise the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R- Release the front return pipe from the fastening springs.1. Disconnect the rapid connectors (1a) joining the front section to the rear section and remove the coupling (1b).
Manual illustration 244002638
Engines: 2.3 JTD 16V
- Lower the lift.1. Disconnect the front return pipe from the fuel return manifold.2. Remove the front return pipe from the engine compartment.
Manual illustration 244002639
Engines: 2.3 JTD 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the front return pipe in the engine compartment.- Connect the front return pipe to the fuel return manifold.- Raise the lift.- Connect the rapid connectors joining the front and rear sections to the coupling.- Secure the front return pipe to the fastening springs. Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle.- Remove the vehicle from the lift.
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Disconnect the negative battery terminal. See in Op. 1048A101. Disconnect the front return pipe from the manifold.- Open the bands fastening the pipe in the engine compartment.
Manual illustration 244002640
Engines: 2.0 JTD 8V
- Raise the lift.1. Disconnect the rapid connector.2. Remove the front fuel return pipe.- Release the pipe from the retaining springs.
Manual illustration 244002641
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the front fuel return pipe and connect it to the rear return pipe.- Secure the pipe to the retaining springs.- Lower the lift.- Connect the front return pipe to the manifold.- Secure the bands fastening the pipe in the engine compartment. See in Op. 1048A10- Connect the negative battery terminal.- Remove the vehicle from the lift.
Engines: 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Disconnect the negative battery terminal. See in Op. 1048B141. Open the retaining bands.2. Remove the pipe.
Manual illustration 244002642
Engines: 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the pipe in place.- Renew the retaining bands. See in Op. 1048B14- Connect the negative battery terminal.- Remove the vehicle from the lift.