1042A42 CNG RECHARGING PIPE FROM SLEEVE TO 3-WAY FITTING - R R

Engines: 2.0 16V

Removing

Refitting

Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation:Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Release the safety pipe.2. Undo the connector from the hose.

Engines: 2.0 16V

1. Undo the connector on the single acting valve.2. Undo the retaining bolts.3. Remove the CNG repressurizing pipe from the three-way coupling hose.

Engines: 2.0 16V

Refitting

Removing

Fit the CNG repressurizing pipe and tighten the connector to the single-acting valve.

[symbol: coppie.tif]	Value daNm	Fastening	Component	Ø
-	2.8	Connector	-	-

Tighten the three bolts fixing the CNG repressurizing pipe.Tighten the connector and reposition the safety pipe.

[symbol: coppie.tif]	Value daNm	Fastening	Component	Ø
-	2.8	Connector	-	-

Move the CNG cut-off solenoids to open position by hand and check system is efficient.Remove the vehicle from the lift.