1042B10 CNG SUPPLY LINE FROM SOLENOID TO PRESSURE REDUCTION UNIT - R R

Engines: 2.0 16V

Removing

Refitting

Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation:Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Undo the retaining nuts.2. Remove the fastening studs.3. Remove vertical guard from its seat.

Engines: 2.0 16V

1. Undo the pipe connector from the three-way connector.

Engines: 2.0 16V

1. Open the bands (1a) and undo the bolts (1b) fixing the fuel pipe retaining bands.

Engines: 2.0 16V

Op. 1048A14 AIR CLEANER FILTERING ELEMENT - REPLACE.Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE1. Undo the nut (1a) fixing the supply pipe to the pressure reduction unit (1b).

Engines: 2.0 16V

1. Undo the connector from the pressure reduction unit (1a) and remove the CNG supply pipe (1b) connecting the canisters and the pressure reduction unit.

Engines: 2.0 16V

Refitting

Removing

Fit the CNG supply pipe and tighten the connector to the pressure reduction unit.

[symbol: coppie.tif]	Value daNm	Fastening	Component	Ø
-	2.8	Connector	-	-

Fasten the pipe near the steering column, tighten the fixing bolt for the band.Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACEOp. 1048A14 AIR CLEANER FILTERING ELEMENT - REPLACE.Fasten the CNG supply pipe and the electrical wiring to the bodyshell using new bands and tightening the bolts fixing the mounting bands.Tighten the pipe connector to the three-way connector.

[symbol: coppie.tif]	Value daNm	Fastening	Component	Ø
-	2.8	Connector	-	-

Position the vertical guard and secure it using the special nuts.Fit the studs to the guard.Move the CNG cut-off solenoids to open position by hand and check system is efficient.Remove the vehicle from the lift.