1. Undo the bolts fixing the cold air intake to the upper crossmember.2. Disconnect the intake hose from the air filter casing.3. Remove the cold intake and intake hose assembly from the engine compartment.
Engines: 2.3 JTD 16V
1. Disconnect the band fastening the air supply hose to the turbocharger.2. Disconnect the vapour recovery pipe from the air supply hose to the turbocharger.3. Disconnect the band from the air filter casing (3a) and remove the air supply hose to the turbocharger (3b).
- Fit the air supply hose to the turbocharger and connect the two ends to the filter casing and to the actual turbocharger.- Connect the vapour recovery pipe to the air supply hose to the turbocharger.- Fit the cold intake and intake hose assembly in the engine compartment and tighten the bolts fixing the cold air intake to the upper headlamp holder crossmember.- Connect the intake hose to the air filter casing.
Op. 7055B54 UNDER-ENGINE GUARD - R R1. Disconnect the band securing the pipe to the turbocharger.- Lower the lift. See in Op. 1048A212. Disconnect the air inlet hose from the flow meter.3. Disconnect the band securing the vapour recovery hose.4. Remove the turbocharger air intake hose.
- Fit the turbocharger air intake hose.- Connect the band securing the vapour recovery hose.- Connect the air inlet hose to the flow meter. See in Op. 1048A21- Raise the lift.- Connect the band securing the pipe to the turbocharger. Op. 7055B54 UNDER-ENGINE GUARD - R R
