FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1048B18 INTERMEDIATE AIR SUPPLY PIPE FROM TURBOCHARGER TO HEAT EXCHANGER - R.R.

Engines: 2.3 JTD 16V
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
Manual illustration 244005714
Engines: 2.3 JTD 16V
Manual illustration 244005715
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 1048B14 AIR DELIVERY PIPE BETWEEN TURBO CHARGER AND HEAT EXCHANGER - REPLACE1. Undo the retaining bolts.2. Move the power assisted steering fluid reservoir aside without disconnecting the two fluid pipes underneath.
Manual illustration 244005716
Engines: 2.3 JTD 16V
1. Disconnect the flexible section of the pipe from the heat exchanger and remove it.
Manual illustration 244005717
Engines: 2.3 JTD 16V
- Then separate the flexible section from the rigid middle section.
Engines: 2.3 JTD 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Join the flexible section to the rigid middle section connecting them using a new band.- Fit the flexible section of the pipe in the housing and connect the flexible section of the pipe to the heat exchanger.- Position the power assisted steering fluid reservoir in the housing and tighten the fixing bolts. Op. 1048B14 AIR DELIVERY PIPE BETWEEN TURBO CHARGER AND HEAT EXCHANGER - REPLACE