FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1060G50 PNEUMATICALLY CONTROLLED THROTTLE BODY R R

Engines: 2.0 JTD 8V
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 1048B16 PIPES AND/OR ELBOW BETWEEN TURBOCHARGER AND THROTTLE CASING - R.R.1. Disconnect the vacuum pipe for the pneumatic valve on the throttle casing.2. Undo the fixing nuts (2a) and remove the throttle casing (2b).
Manual illustration 244002880
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the throttle casing on the intake manifold and the gasket.- Tighten the nuts fixing the throttle casing to the intake manifold.- Connect the vacuum pipe for the pneumatic valve on the throttle casing. Op. 1048B16 PIPES AND/OR ELBOW BETWEEN TURBOCHARGER AND THROTTLE CASING - R.R.