FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1080C14 E.G.R. VALVE MODULATOR - R + R

Engines: 2.0 JTD 8V
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
See in Op. 1080C17- Disconnect the negative battery terminal.1. Disconnect the electrical connection for the throttle casing solenoid valve.
Manual illustration 244000463DescriptionConnector
1Throttle body solenoid valveL062
2. Disconnect the vacuum pipe (2a) from the brake servo pipe and the vacuum pipe to the pneumatic valve on the throttle casing (2b) from the solenoid valve.3. Undo the fixing bolt.4. Remove the throttle casing EGR valve modulating solenoid valve.
Manual illustration 244002996
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the throttle casing EGR valve modulating solenoid valve and tighten the fixing bolt on the mounting bracket.- Connect the vacuum pipe on the brake servo pipe and the vacuum pipe to the pneumatic valve on the throttle casing to the solenoid valve.- Connect the electrical connection for the throttle casing solenoid valve.
Manual illustration 244000463DescriptionConnector
.Throttle body solenoid valveL062
- Connect the negative battery terminal. See in Op. 1080C17