FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1080C80 EXHAUST GAS WATER HEAT EXCHANGER FOR EGR VALVE R R

Engines: 2.0 JTD 8V, 2.8 JTD 8V
Engines: 2.0 JTD 8V
Op. 1080C84 EGR VALVE AND HEAT EXCHANGER ASSEMBLY - DISMANTLING AND REASSEMBLING AT THE BENCH
Engines: 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 1088D67 COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R. See in Op. 1080C101. Open the retaining bands (1a) and release the pipes (1b).2. Undo the fixing nuts.3. Undo the fixing bolts.4. Remove the heat exchanger assembly.
Manual illustration 244002998
Engines: 2.8 JTD 8V
- Place the heat exchanger on the bench.1. Undo the fixing bolts.2. Separate the exhaust gas/water heat exchanger for the EGR system (2a) from the exhaust gas supply pipe between the EGR valve and the intake manifold (2b).
Manual illustration 244002999
Engines: 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- At the bench.- Join the heat exchanger with the pipe using the fixing bolts.- Place the assembly in position on the engine intake.- Tighten the nuts and the bolts and fit the pipes using the retaining bands. See in Op. 1080C10 Op. 1088D67 COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R.