1080D14 PIPE FROM ENGINE OIL VAPOUR SEPARATOR TO INTAKE - R + R

Engines: 2.0 16V

Removing

Refitting

1. Open the pipe fastening band.2. Release the pipe from the separator.

Engines: 2.0 16V

1. Release the oil vapour pipe and remove it.

Engines: 2.0 16V

Refitting

Removing

- Place the pipe in position and restore the retaining bands.

Engines: 2.3 JTD 16V

Removing

Refitting

See in Op. 1048A211. Disconnect the vapour pipe between the filter casing and the turbocharger from the air hose.2. Disconnect the pipe from the connector under the rigid air supply pipe to the heat exchanger.3. Remove the engine oil vapour pipe.

Engines: 2.3 JTD 16V

Refitting

Removing

- Fit the oil vapour pipe.- Connect the pipe to the connector under the rigid air supply pipe to the heat exchanger.- Connect the vapour pipe between the filter casing and the turbocharger to the air hose. See in Op. 1048A21