FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1088B32 ENGINE COOLING RADIATOR SUPPORT BEAM - R R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the bolt (1a) fixing the ABS mounting bracket (1b) to the crossmember.
Manual illustration 244003092
Engines: 2.8 JTD 8V
1. Undo the bolts securing the bumper to the crossmember.2. Undo the nuts (2a) securing the wiring to the crossmember and release it from the fastening springs (2b).3. Undo the bolts securing the beam to the side struts.4. Remove the radiator support beam.
Manual illustration 244003093
Engines: 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the radiator support beam.- Tighten the bolts securing the beam to the side struts.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.8.5BoltCOOLANT RADIATOR SUPPORT BEAMM12
- Secure the wiring to the lower radiator beam and fasten it using the bands and nuts.- Tighten the bolts securing the bumper to the crossmember.- Tighten the bolts fixing the ABS mounting bracket to the crossmember. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Release the electrical wiring secured to the crossmember.2. Undo the bolts securing the front bumper to the crossmember.3. Undo the bolts securing the beam to the side struts.- Remove the radiator support beam.
Manual illustration 244003094
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the radiator support beam.- Tighten the bolts securing the beam to the side struts.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.8.5BoltCOOLANT RADIATOR SUPPORT BEAMM12
- Secure the wiring to the lower radiator crossmember. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Release the electrical wiring secured to the beam from the fastening clips.2. Undo the bolts securing the front headlamps to the beam.3. Undo the bolts securing the beam to the side struts.4. Remove the radiator support beam.
Manual illustration 244003095
Engines: 2.3 JTD 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the radiator support beam.- Tighten the bolts securing the beam to the side struts.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.8.5BoltCOOLANT RADIATOR SUPPORT BEAMM12
- Secure the wiring to the lower radiator beam and fasten with collars. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.
Engines: 2.0 16V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the bolts securing the bumper to the crossmember.2. Undo the nuts (2a) securing the wiring to the crossmember and release it from the fastening springs (2b).3. Undo the bolts securing the beam to the side struts.4. Undo the bolt fixing the ABS mounting bracket to the crossmember.5. Remove the radiator support beam.
Manual illustration 244003096
Engines: 2.0 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the radiator support beam.- Tighten the bolts securing the beam to the side struts.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.8.5BoltCOOLANT RADIATOR SUPPORT BEAMM12
- Secure the wiring to the lower radiator beam and fasten it using the bands and nuts.- Tighten the bolts securing the bumper to the crossmember.- Tighten the bolts fixing the ABS mounting bracket to the crossmember. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.