FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1088D20 COOLANT INLET SLEEVE TO WATER PUMP - R + R

Engines: 2.0 16V, 2.8 JTD 8V
Engines: 2.0 16V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R RPosition a container to collect the coolant.1. Open the retaining bands.2. Remove the coolant hose.Recover the coolant.
Manual illustration 244003141
Engines: 2.0 16V

RefittingManual illustration 21

RemovingManual illustration 20
Fit the sleeve and refit the retaining bands. Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY
Engines: 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 1048A21 FILTER INPUT SLEEVE - R R- Position a suitable container for collecting the engine coolant.1. Open the retaining band (1a) and release the hose (1b).
Manual illustration 244005585
Engines: 2.8 JTD 8V
Op. 7055B54 UNDER-ENGINE GUARD - R R1. Open the fastening band.2. Release the hose from the rigid pipe and remove it.
Manual illustration 244005586
Engines: 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the hose on the rigid pipe and secure it using a retaining band.- Fit the hose on the coolant reservoir. Op. 1048A21 FILTER INPUT SLEEVE - R R Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY Op. 7055B54 UNDER-ENGINE GUARD - R R