FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1088D47 OIL EXCHANGE SLEEVE - R R

Engines: 2.0 JTD 8V
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7055B54 UNDER-ENGINE GUARD - R R- Position a suitable container for collecting the engine coolant.- Disconnect the lower radiator pipe and drain the engine cooling system.1. Using suitable pliers, open the retaining bands on the thermostat.
Manual illustration 244000499DescriptionCodeFunction
.Caliper1.831.138.000Band opening
2. Using suitable pliers, open the retaining bands on the engine oil heat exchanger.
Manual illustration 244000499DescriptionCodeFunction
.Caliper1.831.138.000Band opening
3. Remove the supply and return hoses.
Manual illustration 244003160
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the supply and return hoses to the heat exchanger.- Connect the hoses to the heat exchanger and to the thermostat. Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY Op. 7055B54 UNDER-ENGINE GUARD - R R