FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONER

Engines: 2.0 16V, 2.8 JTD 8V
Engines: 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Disconnect the negative battery terminal. Op. 1092D10 AIR CONDITIONER COMPRESSOR DRIVE BELT - R + R Op. 1092B51 ALTERNATO/WATER PUMP DRIVE BELT - R+R FOR VERSIONS WITH AIR CONDITIONER- Fit the flywheel lock on the bellhousing.
Manual illustration 244000499DescriptionCodeFunction
.Flywheel lock1.870.765.001Prevent flywheel rotation
1. Undo the bolt fixing the crankshaft pulley.2. Remove the crankshaft pulley.
Manual illustration 244003216
Engines: 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the pulley in place and tighten the fixing bolt checking the torque.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.(crankshaft side) 20BoltCRANKSHAFT PULLEYM20
- Remove the flywheel lock from the bellhousing.
Manual illustration 244000499DescriptionCodeFunction
.Flywheel lock1.870.765.001Prevent flywheel rotation
Op. 1092B51 ALTERNATO/WATER PUMP DRIVE BELT - R+R FOR VERSIONS WITH AIR CONDITIONER Op. 1092D10 AIR CONDITIONER COMPRESSOR DRIVE BELT - R + R- Connect the negative battery terminal.
Engines: 2.0 16V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on a lift. Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R- Disconnect the electrical connection for the rpm sensor.1. Undo the retaining bolt.2. Remove the rpm sensor.
Manual illustration 244003217
Engines: 2.0 16V
1. Fit the flywheel lock in the housing for the rpm sensor.
Manual illustration 244000499DescriptionCodeFunction
1Counter-torque1.870.765.000Flywheel lock
Manual illustration 244003218
Engines: 2.0 16V
1. Undo the retaining bolt.2. Remove the auxiliary shaft drive pulley (1b).
Manual illustration 244003219
Engines: 2.0 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the auxiliary shaft drive pulley and tighten the fixing bolt to torque using the angular tightening tool.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.4+51°BoltCRANKSHAFT PULLEY-
Manual illustration 244000499DescriptionCodeFunction
.Torque wrench1.860.942.000Angular tightening
- Remove the flywheel lock fitted previously.
Manual illustration 244000499DescriptionCodeFunction
.Counter-torque1.870.765.000Flywheel lock
- Fit the rpm sensor in the housing on the bellhousing and tighten the fixing bolt.- Connect the electrical connection for the rpm sensor. Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.