FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

2125C30 GEAR ENGAGEMENT CABLE - R R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.1. Release the two ends (1a), move the two gear selector and engagement flexible cables (1b) out of the slot in the bracket (1c) and place them outside of the work area.
Manual illustration 244003680
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Undo the fixing bolts.2. Remove the lower dashboard trim.3. Undo the fixing bolts.4. Remove the lower steering column trim.
Manual illustration 244003681
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Op. 2125C24 GEAR LEVER KNOB - R + R Op. 2125C26 LEVER/KNOB COVER - R+R FOR VERSIONS WITH REVERSE ENGAGEMENT DEVICE1. Undo the fixing bolts.2. Remove the dashboard gear lever trim.
Manual illustration 244003682
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Using a spanner, slightly rotate and release the ends of the gear selector and engagement cables.2. Remove the springs securing the cables to the support.
Manual illustration 244003683
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Undo the fixing bolts.2. Remove the dashboard trim on the floor.
Manual illustration 244003684
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Undo the retaining bolt.2. Remove the plate fastening the transmission cables to the floor.- Release the two gear selector and engagement cables downwards.
Manual illustration 244003685
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Working from the inside of the vehicle, remove the gear selector and engagement cables.
Manual illustration 244003686
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the gear selector and engagement cables.- Fit the plate retaining the transmission cables to the floor and tighten the fixing bolts.- Fit the dashboard trim on the floor and tighten the fixing bolts.- Connect the ends of the cables to the gear lever support and secure them fitting the springs.- Fit the dashboard gear lever trim Op. 2125C26 LEVER/KNOB COVER - R+R FOR VERSIONS WITH REVERSE ENGAGEMENT DEVICE Op. 2125C24 GEAR LEVER KNOB - R + R- Fit the steering column lower cover and tighten the fixing bolts.- Fit the dashboard lower trim and tighten the fixing bolts.- Connect the ends of the flexible cables to the bracket on the gearbox securing them by inserting them in the slot in the actual braket.