2125C10 TRANSMISSION HAND CONTROL ASSEMBLY - ADJUSTMENT/INSPECTION AND EV. LUBIRCATION OF FIXINGS

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Position the vehicle on the lift.- Place the gearbox in neutral. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Place a 10 mm shim under the reverse gear engagement lever.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Lower the vehicle. Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R.1. Lower the lever (1a) and push the button (1b) forwards as far as the splining (1c).

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

1. Release the lever (1a) so as to lock the button (1b).

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Engage fifth speed.1. Lower the lever (1a) and release the button (1b) from the splining (1c).

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Disengage fifth speed and engage first speed.1. Lower the lever (1a) and push the button (1b) forwards as far as the splining (1c).

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Release the lever (1a) so as to lock the button (1b).

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

1. Position a 1.2 mm shim between the gear lever and the barrier.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Send the gear lever into the end of travel position against the shim.1. Lower the lever (1a) and release the button (1b) from the splining (1c).