Manual / Procedures / GEARBOX UNIT / COMANDI SEGNALAZIONE VELOCITA / MILOMETER CONTROL Procedures
2180A20 ODOMETER CONTROL TRANSMISSION, TRANSMISSION SIDE LENGTH - INSPECTION AND REPLACEMENT IF REQUIRED Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
EngineAll engines 2.0 16V 2.0 JTD 8V 2.3 JTD 16V 2.8 JTD 8V Print / save PDF
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Removing - Position the vehicle on the lift. - Disconnect the negative battery terminal. - Raise the vehicle. 1. Unscrew and disconnect the speedometer recorder Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Open the retaining bands. 2. Undo the ring nut. 3. Remove the cable controlling the mileometer and tachograph. Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Refitting - Fit the cable controlling the mileometer and tachograph. - Connect the speedometer recorder to the differential and tighten - Refit the retaining bands and tighten the locknut. - Lower the vehicle. - Connect the negative battery terminal. - Remove the vehicle from the lift. Extracted from your eLearn disc. Original wording and values retained. Engine, equipment and production labels accompany each passage. Some original embedded symbols are unavailable and are marked in place. 
