- Position the vehicle on the lift.- Disconnect the negative battery lead.
Description
Connector
.
Battery
A001B
Op. 1016A10 SOUND-PROOFING COVER - R + R- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo connector (1a) and disconnect the pipe from master cylinder (1b), then release the pipe from the retaining clips.
- Use the appropriate tool to tighten the connector for the rigid pipe to the right front flexible brake pipe.
Description
Code
Function
.
Polygonal spanner for brake connector
1.856.132.000
Rigid pipe from master cylinder to left front brake - R.R.
- Release the rigid pipe from the springs securing it to the bodyshell.2. Remove the rigid pipe from the master cylinder to the right front brake from the lower part of the engine compartment.
- Position the rigid pipe from the master cylinder to the right front brake from the lower part of the engine compartment.- Do up the clips retaining the pipe to the body.- Tighten the connector joining the rigid pipe to the right front flexible brake pipe to the specified torque.
Description
Code
Function
.
Polygonal spanner for brake connector
1.856.132.000
Rigid pipe from master cylinder to left front brake - R.R.
Value - daNm
Fastening
Component
Ø
.
1.6
Connector
PIPE FRONT BRAKE RIGID FROM MASTER CYLINDER
M10X 1
- Use the appropriate tool to tighten the connector joining the rigid pipe to the master cylinder to the specified torque.
Description
Code
Function
.
Polygonal spanner for brake connector
1.856.132.000
Rigid pipe from master cylinder to left front brake - R.R.
