FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Disconnect the negative battery terminal. Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the protective cap from the bleed valve on the rear brake caliper.- Connect the recovery device (pipe and reservoir) to the rear brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Disconnect the electrical connection for the ABS control unit.
Manual illustration 244000463DescriptionConnector
1ABS control unitM050
2. Undo the brake pipe connectors at the hydraulic control unit.
Manual illustration 244003905
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
- Release the springs fastening the brake pipes.1. Undo the bolts fixing the ABS control unit bracket to the bodyshell.2. Remove the support assembly complete with ABS control unit.3. At the bench, undo the nuts and remove the actual control unit from the ABS control unit bracket.
Manual illustration 244003906
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the hydraulic and electronic control unit for the ABS on the mounting bracket and tighten the nuts to torque.- Fit the hydraulic control unit complete with bracket in the special housing and tighten the bolts fixing it to the bodyshell to torque.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.1.9 - 3.0BoltHYDRAULIC/ELECTRONIC CONTROL UNIT SUPPORT (ABS)M8
- Attach the spring to the control unit.- Tighten the brake pipe connectors at the ABS hydraulic control unit.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.1.2 - 2.2NutSYSTEM HYDRAULIC AND ELECTRONIC CONTROL UNITM10
Manual illustration 244000559Value - daNmFasteningComponentØ  
.1.2 - 2.2NutSYSTEM HYDRAULIC AND ELECTRONIC CONTROL UNITM12
- Connect the electrical connection for the ABS control unit.
Manual illustration 244000463DescriptionConnector
.ABS control unitM050
Op. 7055B54 UNDER-ENGINE GUARD - R R- Fit the protective cap for the bleed valve on one of the front brake calipers. Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the lift.- Connect the negative battery terminal.- Remove the vehicle from the lift.- Test the operation of the braking system.