FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3340A30 RPM SENSOR (ONE) OF ONE L/H OR R/H FRONT WHEEL - R+R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Remove the front wheel. Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE- < R1 > (Left ABS sensor only)1. Disconnect the electrical connection (the one on the left side is shown).
Manual illustration 244000463DescriptionConnector
1Left front wheel sensor for ABSK070
Manual illustration 244000463DescriptionConnector
1Right front wheel sensor for ABSK071
Manual illustration 244003907
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Raise the vehicle and release the electrical wiring for the ABS sensor from the retainers.2. Undo the bolts (2a) and remove the ABS sensor and wiring (2b).
Manual illustration 244003908
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Check that the ABS sensor and wiring is not damaged.- Position the ABS sensor in the housing.- Tighten the ABS sensor bolt.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.0.8BoltFRONT A.B.S. SENSORM6
- Fasten the electrical wiring for the ABS sensor to the retainers.- Lower the vehicle and connect the electrical connection.
Manual illustration 244000463DescriptionConnector
.Left front wheel sensor for ABSK070
Manual illustration 244000463DescriptionConnector
.Right front wheel sensor for ABSK071
Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE- < R1 > (Left ABS sensor only)- Refit the front wheel.- Remove the vehicle from the lift.- Check the operation of the braking system using the Examiner or other diagnostic equipment.