FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3340B82 RIGID PIPE ONE ON REAR SUSPENSION AXLE RR

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Remove the protective cap from the bleed valve on the rear brake caliper.- Connect the recovery device (pipe and reservoir) to the rear brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the connector for the rigid pipe at the rear suspension axle from the support with the rear brake caliper flexible pipe.2. Release the retaining spring.3. Undo the connector for the rigid pipe at the rear suspension axle from the connector at the rear suspension axle for the rear brake pipes.4. Remove the rigid pipe releasing it from the springs.
Manual illustration 244003942
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Check that the rigid pipe at the rear suspension axle is not damaged.- Fit the rigid pipe on the rear suspension axle and secure it to the springs.- Tighten the connector for the rigid pipe at the rear suspension axle to the support with the rear brake caliper flexible pipe.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.1.2 - 2.2ConnectorRIGID PIPE FROM CONNECTOR TO REAR BRAKESM10
- Tighten the connector for the rigid pipe at the rear suspension axle to the connector for the rear brake pipes.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.1.2 - 2.2ConnectorRIGID PIPE FROM CONNECTOR TO REAR BRAKESM10
Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR- Remove the vehicle from the lift.- Test the operation of the braking system.