FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3340B92 CONNECTOR AT REAR SUSPENSION AXLE FOR REAR BRAKE PIPES - R.R.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.- Remove the protective cap from the bleed valve on the rear brake caliper.- Connect the recovery device (pipe and reservoir) to the rear brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained. Op. 3340B34 INTERMEDIATE FLEXIBLE PIPE (ONE), LEFT OR RIGHT, TO THE REAR BRAKES - R.R.1. Undo the nut fixing the connector at the rear suspension axle for the rear brake pipes on the rear suspension axle.2. Release the bracket and cables for the ABS sensors.3. Undo the rigid pipe connectors at the rear suspension axle.
Manual illustration 244006176
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
- Release the rigid pipes at the rear suspension axle from the springs.1. Remove the connector at the rear suspension axle for the rear brake pipes.
Manual illustration 244006177
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the rigid pipes at the rear suspension axle to the springs.- Fasten the connector at the rear suspension axle for the rear brake pipes.- Tighten the rigid pipes to the rear suspension axle.- Secure the ABS sensor cables Op. 3340B34 INTERMEDIATE FLEXIBLE PIPE (ONE), LEFT OR RIGHT, TO THE REAR BRAKES - R.R. Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR- Remove the vehicle from the lift.- Test the operation of the braking system.