- Draw off the oil in the reservoir using a syringe and collect it in a suitable container. Op. 7055B54 UNDER-ENGINE GUARD - R R-- Undo the connector (1a) and disconnect the return pipe (1b) from the power assisted steering box.
Engines: 2.0 16V
1. Undo the connector (1a) and remove the supply pipe (1b) from the pump to the power assisted steering box.
- Fit the supply pipe from the pump to the steering box and tighten the connector on the power assisted steering pump.- Tighten the connector securing the pipe to the power assisted steering box.
Value - daNm
Fastening
Component
Ø
.
5,5
Nut
PIPE BTWN PUMP + POWER STEERING BOX
M16
- Lower the vehicle.- Refill the power assisted steering system using the appropriate fluid.
- Position the vehicle on the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R- Position a suitable container under the power assisted steering box to collect the fluid.- Raise the vehicle.1. Undo the connector (1a) and disconnect the return pipe (1b) from the power assisted steering box.- Release the pipe from the retaining springs on the power assisted steering box.
Engines: 2.0 JTD 8V
- Release the pipe from the bands and from the bracket on the intermediate driveshaft support.1. Undo the connector for the pipe on the power assisted steering pump.2. Remove the supply pipe from the pump to the power assisted steering box.
- Fit the supply pipe from the pump to the steering box and tighten the connector on the power assisted steering pump.- Secure the pipe to the bands and to the bracket on the intermediate driveshaft support.- Tighten the connector securing the pipe to the power assisted steering box.
- Position the vehicle on the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R- Position a suitable container under the power assisted steering box to collect the fluid.- Raise the vehicle.1. Undo the connector (1a) and disconnect the return pipe (1b) from the power assisted steering box.- Release the pipe from the retaining springs on the power assisted steering box.
Engines: 2.3 JTD 16V
1. Undo the connector for the pipe on the power assisted steering pump.2. Remove the supply pipe from the pump to the power assisted steering box.
- Fit the supply pipe from the pump to the steering box and tighten the connector on the power assisted steering pump.- Secure the pipe to the bands and to the bracket on the power assisted steering box.- Tighten the connector securing the pipe to the power assisted steering box.
