4410C10 FRONT SUSPENSION STABILIZER BAR - R+R - CHECK WHEEL GEOMETRY SEPARATELY

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

Removing

Refitting

- Position the vehicle on the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the nut for the side steering rod right track rod end.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

1. Disconnect the track rod end using the special tool.

	Description	Code	Function
1	Extractor	1.847.038.000	Track rod end extraction

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Proceed working on both sides of the vehicle.1. Undo the lower nut fixing the anti-roll bar connecting rod.2. Keep the washer (2a) and the bush (2b).3. Undo the upper connecting rod fixing nut.4. Undo the bolts securing the anti-roll bar to the front crossmember.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

1. Remove the connecting rod.2. Keep the washer (2a) and the bush (2b).3. Remove the anti-roll bar from the left side of the vehicle.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

Refitting

Removing

- Check that the anti-roll bar is not damaged.- Place the anti-roll bar in position.- Place the connecting rods and the washers and bushes in position.- Work on both sides of the vehicle.- Tighten the bolts securing the anti-roll bar to the front crossmember.

	Value - daNm	Fastening	Component	Ø
.	7.7 - 11.2	Bolt	FRONT ANTI-ROLL BAR	M12x1.5

- Tighten the upper nut fixing the connecting rod to the anti-roll bar.

	Value - daNm	Fastening	Component	Ø
.	8.2- 11.9	Upper nut	ANTI-ROLL BAR CONNECTING ROD	M12x1.25

- Place the bush and the washer in position and tighten the lower nut fixing the connecting rod to the track control arm.

	Value - daNm	Fastening	Component	Ø
.	5.1 - 7.4	Lower nut	ANTI-ROLL BAR CONNECTING ROD	M12x1.25

- Tighten the nut for the side steering rod right track rod end.

	Value - daNm	Fastening	Component	Ø
.	6.1 - 9.0	Nut	SIDE STEERING ROD	M12x1.25

Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.