FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

5020M38 ADDITIONAL HEATER FUEL METERING PUMP - R.R.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Disconnect the negative battery terminal.- Raise the vehicle on the lift.- Position a suitable container for collecting the fuel.1. Disconnect the pipe from the coupling with the fuel supply pipe from the pump loosening the retaining band.
Manual illustration 244007060
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Support the weight of the heater unit and loosen the bolts (1a) and the nuts (1b) fixing the independent heater unit mounting bracket.
Manual illustration 244007061
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Disconnect the fuel inlet pipe from the independent heater loosening the retaining band.- Remove the fuel supply pipe to the additional independent heater.
Manual illustration 244007062
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Connect the fuel supply pipe to the independent heater unit using the retaining band.- Fasten the support for the independent heater unit to the bodyshell tightening the nuts and bolts to the recommended torque.
Value - daNmFasteningComponentØ  Validity
2NutADDITIONAL HEATER BOILERM8T.T
Value - daNmFasteningComponentØ  Validity
2BoltADDITIONAL HEATER BOILERM8T.T
- Connect the pipe to the coupling with the fuel supply pipe from the pump using the retaining band.- Lower the vehicle on the lift.- Connect the negative battery terminal.