FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

5020M50 ADDITIONAL INDEPENDENT HEATER WATER SUPPLY AND RETURN PIPES - R.R.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Disconnect the negative battery terminal.- Prepare a suitable container for collecting the engine coolant.1. Disconnect the independent heater water supply (1a) and return (1b) pipes in the engine compartment removing the retaining bands.
Manual illustration 244004205
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
- Raise the vehicle on the lift.
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Op. 1040A10 FUEL TANK - R + R AND DECANT FUEL- Prepare a suitable container for collecting the engine coolant.1. Support the weight of the heater unit and loosen the bolts (1a) and the nuts (1b) fixing the independent heater unit mounting bracket.
Manual illustration 244004206
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Disconnect the independent heater coolant inlet and outlet pipes loosening the retaining bands.
Manual illustration 244004207
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
- Release the pipes from the retaining springs.- Remove the additional independent heater water inlet and outlet pipes.
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Connect the water inlet and outlet pipes to the independent heater unit using the retaining bands.- Fasten the support for the independent heater unit to the bodyshell tightening the nuts and bolts to the recommended torque.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.2NutADDITIONAL HEATER BOILERM8
Manual illustration 244000559Value - daNmFasteningComponentØ  
.2BoltADDITIONAL HEATER BOILERM8
- Secure the pipes to the retaining springs.- Fit the free ends of the pipes in the engine compartment. Op. 1040A10 FUEL TANK - R + R AND DECANT FUEL Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
- Lower the vehicle on the lift.- Connet the water inlet and outlet pipes in the engine compartment using the retaining bands. Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY- Connect the negative battery terminal.
Engines: 2.0 JTD 8V, 2.8 JTD 8V
Op. 1040B62 FUEL COOLING DEVICE FOR TANK RETURN CIRCUIT - R.R.
Engines: 2.0 JTD 8V, 2.8 JTD 8V
Op. 1040B62 FUEL COOLING DEVICE FOR TANK RETURN CIRCUIT - R.R.