FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

5020M84 WIRING ON ADDITIONAL HEATER - R.R.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Disconnect the negative battery terminal.- Raise the vehicle on the lift.1. Support the weight of the heater unit and loosen the bolts (1a) and the nuts (1b) fixing the independent heater unit mounting bracket.
Manual illustration 244004209
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Disconnect the inlet pipe loosening the bands and remove it.
Manual illustration 244004210
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fasten the air inlet pipe to the heater using the retaining bands.- Fasten the support for the independent heater unit to the bodyshell tightening the nuts and bolts to the recommended torque.
[symbol: coppie 01.jpg]Value - daNmFasteningComponentØ  
-2Nut-M8
[symbol: coppie 02.jpg]Value - daNmFasteningComponentØ  
-2Bolt-M8
- Lower the vehicle on the lift.- Connect the negative battery terminal. Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY