Procedures

5505A62 LEFT CENTRE CABLE LOOM UNDER PASSENGER COMPARTMENT CARPET - R.R.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

Removing

- Disconnect the negative battery terminal.Op.7040A20RIVESTIMENTO INFERIORE SX PLANCIA - S.R.Op.3380A10LEVA FRENO A MANO - S.R.Op.7040L54BATTICALCAGNO VANO PORTA ANTERIORE LATO GUIDA - S.R.- Disconnect the connectors in the dashboard wiring and on the handbrake lever.

[symbol: EL_COMP 01.jpg]	Description	Connector
-	Dashboard/left rear coupling	D025

[symbol: EL_COMP 01.jpg]	Description	Connector
-	Handbrake applied switch	I040

[symbol: EL_COMP 03.jpg]	Description	Connector
-	Optional dashboard/left rear coupling	D162

[symbol: EL_COMP 04.jpg]	Description	Connector
-	Left rear/rear speaker and rear current socket bridge coupling	D178

- Secure the shunts to the main wiring.- Remove the wiring duct from the housing in the bodyshell.Op.5540A44FANALE POSTERIORE (UNO), SX O DX - S.R.[left side]- Disconnect the electrical connectors housed in the left rear light cluster housing.

[symbol: EL_COMP 05.jpg]	Description	Connector
-	Reverse gear engagement auditory warning	E048

[symbol: EL_COMP 06.jpg]	Description	Connector
-	Left rear earth	C030

[symbol: EL_COMP 07.jpg]	Description	Connector
-	Left rear/left swing door coupling	D152

[symbol: EL_COMP 08.jpg]	Description	Connector
-	Left rear light cluster	F030

- Raise the vehicle on the lift.1. Remove the inspection cover.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

- Connect a sensor to the wiring.- Release the wiring from the light cluster housing until it comes out of the inspection compartment.- Lower the vehicle on the lift.- Partly lift up the front passenger compartment carpet and release the passenger compartment side wiring.- Release the wiring from the sensor.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

Refitting

Removing

- Secure the wiring to the end of the passenger compartment side sensor.- Lift up the passenger compartment floor covering and move it to the side.- Insert the wiring in the special openings in the left reara light cluster housing pulling the end of the sensor.- Connect the electrical connectors housed in the left rear light cluster housing.

[symbol: EL_COMP 09.jpg]	Description	Connector
-	Left rear light cluster	F030

[symbol: EL_COMP 10.jpg]	Description	Connector
-	Reverse gear engagement auditory warning	E048

[symbol: EL_COMP 11.jpg]	Description	Connector
-	Left rear earth	C030

[symbol: EL_COMP 12.jpg]	Description	Connector
-	Left rear/left swing door coupling	D152

Op.5540A44FANALE POSTERIORE (UNO), SX O DX - S.R.- Raise the vehicle on the lift.- Insert the rear inspection compartment sealing plug in the special housing.- Lower the vehicle on the lift.- Connect the electrical connectors to the dashboard wiring and the handbrake lever.

[symbol: EL_COMP 13.jpg]	Description	Connector
-	Dashboard/left rear coupling	D025

[symbol: EL_COMP 14.jpg]	Description	Connector
-	Handbrake applied switch	I040

[symbol: EL_COMP 15.jpg]	Description	Connector
-	Optional dashboard/left rear coupling	D162

[symbol: EL_COMP 16.jpg]	Description	Connector
-	Left rear/rear speaker and rear current socket bridge coupling	D178

- Fit the cable duct in the special housing in the bodyshell.Op.7040L54BATTICALCAGNO VANO PORTA ANTERIORE LATO GUIDA - S.R.Op.3380A10LEVA FRENO A MANO - S.R.Op.7040A20RIVESTIMENTO INFERIORE SX PLANCIA - S.R.- Connect the negative battery terminal.