FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

5540B28 BULB (1) FOR FRONT TURN SIGNAL IN A HEAD LAMP (1), LH OR RH - R R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Disconnect the negative battery terminal.- Disconnect the electrical connection for the headlamp.
Manual illustration 244000463DescriptionConnector
.Left headlampF010
Manual illustration 244000463DescriptionConnector
.Right headlampF011
1. Undo the headlamp retaining bolt.2. Remove the headlamp from its seat and turn on the hinge.
Manual illustration 244004480
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Release the headlamp protection assembly.
Manual illustration 244004481
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
- Disconnect the bulb retaining clips.1. Remove the bulb carrier (1a) from its seat and remove the bulb of the front light of one light cluster (1b).
Manual illustration 244004482
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the bulb for the front light of one light cluster.- Fit the bulb holder in its seat.- Fit the headlamp protection assembly.- Turn the headlamp and press-fit into its housing- Secure the headlamp with a bolt.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.(headlamp carrier beam hinge fastener) 0.39 - 0.75BoltMAIN HEADLAMP LIGHT BEAMM6
- Disconnect the electrical connection for the headlamp.
Manual illustration 244000463DescriptionConnector
.Left headlampF010
Manual illustration 244000463DescriptionConnector
.Right headlampF011
- Disconnect the negative battery terminal.