FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

7020D30 SLIDING DOOR EXTERIOR HANDLE, LEFT OR RIGHT - R+R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 7040B18 L/H OR R/H SIDE TRIM (ONE) OF LUGGAGE COMPARTMENT/LOAD PLATFORM - ARRANGE Op. 7020D34 SLIDING DOOR INTERIOR HANDLE - R+R1. Undo the nuts (1a) and the bolt (1b) fixing the handle.- Disconnect the safety rods for the lock and the pawl from the handle.2. Remove the outer handle.
Manual illustration 244004639
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the outer handle in the special housing in the sliding door.- Connect the safety rods for the lock and the pawl to the handle.- Fasten the outer handle to the sliding door tightening the fixing nuts and the bolt. Op. 7020D34 SLIDING DOOR INTERIOR HANDLE - R+R Op. 7040B18 L/H OR R/H SIDE TRIM (ONE) OF LUGGAGE COMPARTMENT/LOAD PLATFORM - ARRANGE