Manual / Procedures / ENGINE UNIT / GPL TANK AND PIPES / PROTECTIONS FASTENINGS Procedures
1043E12 GPL TANK GUARD PROTECTION R R EngineAll engines 2.0 16V 2.0 JTD 8V 2.3 JTD 16V 2.8 JTD 8V Print / save PDF
Engines: 2.0 16V
Removing Position the vehicle on the lift. 1. Position a hydraulic support under the LPG canister guard. 2. Undo the fixing bolts around the perimeter and the four centre ones, keep the washers. 3. Lower the hydraulic support and remove the LPG tank guard. Engines: 2.0 16V
Refitting Check the condition of the LPG tank, in other words there should be no cracks, cuts or any type of dents. If this is not the case, proceed with replacing the guard. Position the LPG tank guard on the hydraulic support. Position the fixing bolts and washers. Tighten the fixing bolts to the recommended torque. [symbol: coppie.tif] Value daNm Fastening Component Ø - 1 Bolt M6
Remove the hydraulic support. Remove the vehicle from the lift. Extracted from your eLearn disc. Original wording and values retained. Engine, equipment and production labels accompany each passage. Some original embedded symbols are unavailable and are marked in place. 
