Position the vehicle on the lift.Disconnect the negative battery terminal.Raise the vehicle.1. Undo the retaining nuts.2. Remove the fastening studs.3. Remove vertical guard from its seat.
Engines: 2.0 16V
1. Disconnect the electrical coupling.
[symbol: elettrico.tif]
Description
Connector
1
Engine / injection coupling
D193
Engines: 2.0 16V
1. Disconnect the electrical connections for the cut out solenoid valves on the canisters.
Engines: 2.0 16V Equipment / version codes: Upgraded autonomy [A106]
1. Disconnect the electrical connections for the cut out solenoid valves on the additional canisters.
Engines: 2.0 16V
Release the wiring from the fastenings on the body and remove it.
Place the wiring in position and secure it to the bodyshell using the special fastenings.
Engines: 2.0 16V Equipment / version codes: Upgraded autonomy [A106]
Connect the electrical connections for the cut out solenoid valves on the additional canisters.
Engines: 2.0 16V
Connect the electrical connections for the cut out solenoid valves on the canisters.Connect the electrical coupling.
[symbol: elettrico.tif]
Description
Connector
-
Engine / injection coupling
D193
Place the vertical shield in position.Secure the vertical guard using the special buttons and fixing nuts.Lower the vehicle.Connect the negative battery terminal.Remove the vehicle from the lift.
