1020D18 FRONT CRANK SHAFT COVER OIL SEAL - REPLACE

Engines: 2.3 JTD 16V

Removing

Refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R See in Op. 1092A10 See in Op. 1032D12 See in Op. 1032B10 See in Op. 1032B441. Use the tool described below to fit the oil sealing ring.2. Position the tool extraction pincers (2a) into oil sealing ring grooves (2b).3. Secure the extraction pincers in position using retaining bolts.4. Tighten the tool pin to remove the oil sealing ring from its seat.

	Description	Code	Function
1	Extractor	99340058	Front cover gasket removal

Engines: 2.3 JTD 16V

Refitting

Removing

1. Use the tool described below to fit the oil sealing ring.1. Tighten the threaded tool pin until it comes into contact with the crankshaft drive gear seat.- Position the new oil sealing ring in its seat3. Position introduction tool (3a) in contact with the oil sealing ring and tighten into nut (3b) to fully fit the oil sealing ring into its seat on the front cover.

	Description	Code	Function
1	Fitting tool	99346254	Front cover gasket fitting

Engines: 2.0 JTD 8V

Removing

Refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 1092G10 SINGLE ENGINE BELT R R See in Op. 1092A10 See in Op. 1032D12 See in Op. 1032B10 See in Op. 1032B44- Remove the oil seal from the housing in the front cover.

Engines: 2.0 JTD 8V

Refitting

Removing

1. Fit the oil seal (1a) using the tool (1b) in the housing in the crankshaft front cover.

	Description	Code	Function
1	Fitting tool	1.860.855.000	Fitting crankshaft front oil seal