Procedures
1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R
Engines: 2.0 16V
Removing
- Disconnect the negative battery terminal. Op. 5530A50 ALTERNATOR GUARD - R & R.1. Undo the bolts securing the power steering fluid reservoir bracket.2. Move the power assisted steering fluid reservoir complete with bracket aside.
Engines: 2.0 16V
Engines: 2.0 16V
Refitting
- Tighten the engine oil pressure warning light switch in the housing.- Connect the electrical connection for the switch.- Position the power assisted steering fluid reservoir and tighten the bolts fixing it to the crossmember. Op. 5530A50 ALTERNATOR GUARD - R & R.- Connect the negative battery terminal.Engines: 2.3 JTD 16V
Removing
- Position the vehicle on the lift.- Disconnect the negative battery terminal.- Raise the lift. Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 5520B10 STARTER MOTOR - R+R- Disconnect the electrical connection for the switch.![]() | Description | Connector |
|---|---|---|
| . | Engine oil pressure sensor | K028 |

Engines: 2.3 JTD 16V
Refitting
- Fit the engine oil pressure warning light switch.![]() | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | 3 | - | INSUFFICIENT ENGINE OIL PRESSURE SWITCH | M14 X 1.5 |
![]() | Description | Connector |
|---|---|---|
| . | Engine oil pressure sensor | K028 |
Engines: 2.8 JTD 8V
Removing
Op. 7055B54 UNDER-ENGINE GUARD - R R1. Disconnect the electrical connection.![]() | Description | Connector |
|---|---|---|
| 1 | Engine oil pressure sensor | K028 |

Engines: 2.8 JTD 8V
Refitting
- Tighten the sensor in the housing.- Connect the electrical connection.![]() | Description | Connector |
|---|---|---|
| . | Engine oil pressure sensor | K028 |


