FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Engines: 2.0 JTD 8V, 2.3 JTD 16V
Engines: 2.0 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on a lift. Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 1092G10 SINGLE ENGINE BELT R R- Disconnect the electrical connection for the rpm sensor.
Manual illustration 244000463DescriptionConnector
.Rpm sensorK046
1. Undo the fixing bolt.2. Remove the rpm sensor.
Manual illustration 244003220
Engines: 2.0 JTD 8V
1. Fit the flywheel lock in the housing for the rpm sensor.
Manual illustration 244000499DescriptionCodeFunction
1Flywheel lock1.870.765.001Prevent flywheel rotation
Manual illustration 244003221
Engines: 2.0 JTD 8V
1. Undo the fixing bolts (1a) and remove the auxiliary shaft drive pulley (1b).
Manual illustration 244003222
Engines: 2.0 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the auxiliary shaft drive pulley and tighten the fixing bolt to torque using the angular tightening tool.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.4+51°BoltCRANKSHAFT PULLEY-
Manual illustration 244000499DescriptionCodeFunction
.Torque wrench1.860.942.000Connecting rod cap bolt angular tightening
- Remove the flywheel lock fitted previously.
Manual illustration 244000499DescriptionCodeFunction
.Flywheel lock1.870.765.001Prevent flywheel rotation
- Fit the rpm sensor in the housing on the bellhousing and tighten the fixing bolt.- Connect the electrical connection for the rpm sensor.
Manual illustration 244000463DescriptionConnector
.Rpm sensorK046
Op. 1092G10 SINGLE ENGINE BELT R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.
Engines: 2.3 JTD 16V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on a lift. Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R- Slacken the engine component pulley retaining bolts before removing the auxiliary drivebelt. Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R1. Undo the retaining bolts.2. Remove the auxiliary drivebelt pulley.
Manual illustration 244003223
Engines: 2.3 JTD 16V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the auxiliary drivebelt pulley.- Tighten the bolts securing the crankshaft pulley to the recommended torque.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.3BoltsCRANKSHAFT PULLEYM8
Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.