FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1820B41 HOSE FROM CLUTCH RESERVOIR TO MASTER CYLINDER (PUMP) - R R FOR RH DRIVE VERSIONS

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Disconnect the negative battery lead.
Manual illustration 244000463DescriptionConnector
.BatteryA001B
Op. 1016A10 SOUND-PROOFING COVER - R + R- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.- Proceed from the inside of the passenger compartment.1. Disconnect the pipe to the brake/clutch fluid reservoir.
Manual illustration 244003267
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Open the band (1a), disconnect the pipe (1b) and extract it through the opening (1c) in the bodyshell in the engine compartment.
Manual illustration 244003268
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Introduce the flexible pipe via the opening in the bodyshell in the engine compartment.- Connect the pipe to the brake-clutch fluid reservoir and close it using the band.- Proceed from the inside of the passenger compartment.- Connect the pipe to the operating cylinder on the clutch pedal. Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR Op. 1016A10 SOUND-PROOFING COVER - R + R- Connect the negative battery lead.
Manual illustration 244000463DescriptionConnector
.BatteryA001B