FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3330E46 RIGID PIPE (ONE) FROM MASTER CYLINDER PUMP TO LEFT FRONT BRAKE - R.R.

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the left front brake pipe connector from the master cylinder.
[symbol: TOOLS 01.jpg]DescriptionCodeFunction
-Polygonal spanner for brake connector1.856.132.000Loosen/tighten brake pipe connectors
Manual illustration 244006162
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Op. 4450B02 LEFT FRONT WHEEL R R
[symbol: TOOLS 02.jpg]DescriptionCodeFunction
-Polygonal spanner for brake connector1.856.132.000Loosen/tighten brake pipe connectors
- Release the rigid pipe from the springs securing it to the bodyshell.2. Remove the rigid pipe from the master cylinder to the right front brake from the lower part of the engine compartment.
Manual illustration 244006164
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the rigid pipe from the master cylinder to the left front brake via the lower part of the engine compartment.- Tighten the connector for the rigid pipe to the left front flexible brake pipe.
[symbol: TORQUE 01.jpg]Value - daNmFasteningComponentØ  
-1.2 - 2.2, daNmnut-M10x1
- Connect the pipe to the springs near the connector. Op. 4450B02 LEFT FRONT WHEEL R R- Lower the vehicle.- Connect the left front brake pipe connector to the master cylinder.
[symbol: TORQUE 02.jpg]Value - daNmFasteningComponentØ  
-1.2 - 2.2, daNmnut-M10x1
Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR