FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3330E51 RIGID PIPE (ONE), LH OR RH, FROM MASTER CYLINDER TO FITTING - R R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the bleed valve on the brake caliper.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the connector for the rear brake pipe from the master cylinder.
Manual illustration 244000499DescriptionCodeFunction
.Polygonal spanner for brake connector1.856.132.000Loosen/tighten brake pipe connectors
Manual illustration 244003892
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Undo the connector for the rigid pipe from the connector with the rear section of the pipe.- Release the rigid pipe from the springs securing it to the bodyshell.2. Remove the rigid pipe from the master cylinder to the rear brake pipe connector via the lower part of the engine compartment.
Manual illustration 244003893
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the rigid pipe from the master cylinder to the rear brake pipe connector via the lower part of the engine compartment.- Tighten the connector joining the front and rear sections of the rigid pipe.- Connect the pipe to the springs near the fuel tank.- Lower the vehicle.- Connect the connector for the rear brake pipe to the master cylinder.
Manual illustration 244000559Value - daNmFasteningComponentØ  
.1.2 -2.2 daNmNutBRAKING SYSTEM PIPE CONNECTORSM10x1
Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR