FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3380A30 HANDBRAKE CABLE - R+R

Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on a lift.- Remove both the rear wheels. Op. 4450D10 HUB OF ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED- < R1 > (left and right sides)1. Working underneath the vehicle, undo the handbrake adjustment nuts.2. Remove the spacer.3. Undo the bolt (3a) and remove the support (3b).4. Release the ends of the outer casings (4a) from the retainers (4b) on both sides.
Manual illustration 244003959
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Release the cable retainers (1a) from the leaf springs (1b) on both sides.
Manual illustration 244003960
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Move the end (1a) of the handbrake cable in the compartment (1b) on both sides; then extract it from the handbrake shoe linkage.2. Remove the handbrake control cable.
Manual illustration 244003961
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Check that the handbrake control cable is not damaged.- Fit the ends of the handbrake control cable in the housing in the shoe linkage on both sides.- Fit the cable retainers to the leaf springs on both sides.- Fit the outer casings in the retainers on both sides.- Position the support and tighten the bolt.- Position the spacer.- Screw in the handbrake adjustment nuts without tightening them. Op. 3380A04 HANDBRAKE - CHECK TRAVEL Op. 4450D10 HUB OF ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED- < R1 > (left and right sides)- Refit the rear wheels.- Remove the vehicle from the lift.- Check that the brakes are working.
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on a lift.- Remove both the rear wheels. Op. 3320B30 LH OR RH REAR BRAKE DRUM (ONE) R R- < R1 > (left and right sides)1. Working underneath the vehicle, undo the handbrake adjustment nuts.2. Remove the spacer.3. Undo the bolt (3a) and remove the support (3b).4. Release the ends of the outer casings (4a) from the retainers (4b) on both sides.
Manual illustration 244003962
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Release the cable retainers (1a) from the leaf springs (1b) on both sides.
Manual illustration 244003963
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V
1. Move the end (1a) of the handbrake cable in the compartment (1b) on both sides; then extract it from the handbrake shoe linkage.2. Remove the handbrake control cable.
Manual illustration 244003964
Engines: 2.0 16V, 2.0 JTD 8V, 2.3 JTD 16V, 2.8 JTD 8V

RefittingManual illustration 21

RemovingManual illustration 20
- Check that the handbrake control cable is not damaged.- Connect the handbrake control cable to the shoe linkage on both sides.- Fit the cable retainers to the leaf springs on both sides.- Fit the outer casings to the retainers on both sides.- Position the support and tighten the bolt.- Position the spacer.- Screw in the handbrake adjustment nuts without tightening them. Op. 3380A04 HANDBRAKE - CHECK TRAVEL Op. 3320B30 LH OR RH REAR BRAKE DRUM (ONE) R R- < R1 > (left and right sides)- Refit the rear wheels.- Remove the vehicle from the lift.- Check that the brakes are working.