FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

3380A31 HANDBRAKE CABLE INTERMEDIATE SECTION - R.R.

Engines: 2.0 16V
Equipment / version codes: BIPOWER [200]
Engines: 2.0 16V
Equipment / version codes: BIPOWER [200]

RemovingManual illustration 20

RefittingManual illustration 21
- Position the vehicle on the lift.1. Undo the bolt fixing the canister shield and handbrake mounting bracket (1a) and remove the split pin (1b).
Manual illustration 244006184
Engines: 2.0 16V
Equipment / version codes: BIPOWER [200]
1. Disconnect the intermediate handbrake cable from the rear idler.
Manual illustration 244006185
Engines: 2.0 16V
Equipment / version codes: BIPOWER [200]
1. Disconnect the intermediate handbrake cable from the front idler.2. Remove the intermediate section of the handbrake cable.
Manual illustration 244006186
Engines: 2.0 16V
Equipment / version codes: BIPOWER [200]

RefittingManual illustration 21

RemovingManual illustration 20
- Fit the intermediate section of the handbrake cable and connect it to the front idler.- Connect the intermediate handbrake cable to the rear idler.- Join the two sections of the intermediate handbrake cable with the front section, securing them using the split pin.- Tighten the bolt fixing the canister shield and cable support.- Proceed with the adjustment of the handbrake cable. Op. 3380A04 HANDBRAKE - CHECK TRAVEL- Remove the vehicle from the lift.