FIAT / DUCATO 244eLearn workshop manual · English · Offline edition
Procedures

1043B14 FLEXIBLE RETURN PIPE FROM FITTING TO INJECTORS RIGID PIPE -R.R.

Engines: 2.0 16V
Engines: 2.0 16V

RemovingManual illustration 20

RefittingManual illustration 21
Drain the return pipe from the return solenoid valve to the injectors, following the instructions in the procedure:Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONSDisconnect the negative battery terminal.1. Disconnect the connector (1a) for the return pipe to the intermediate block (1b) for the return line; keep the seal underneath taking special care not to damage the pipe threaded seat.2. Undo the connector (2a) on the rigid return pipe (2b) from the injectors; keep the seal underneath taking special care not to damage the pipe threaded seat.3. Remove the flexible return pipe from the rigid pipe connector to the injectors.
Manual illustration 244006817
Engines: 2.0 16V

RefittingManual illustration 21

RemovingManual illustration 20
Position the flexible return pipe from the rigid pipe connector to the injectors complete with new seals.Tighten the connector for the flexible pipe to the rigid return pipe from the injectors.
[symbol: coppie.tif]Value daNmFasteningComponentØ  
-7Connectoron the return line to the rigid return pipe from the injectorsM18 X 1.5
Tighten the connector for the flexible return pipe to the return line intermediate block.
[symbol: coppie.tif]Value daNmFasteningComponentØ  
-7Connectoron the return line intermediate blockM18 X 1.5
Op. 1043A04 GPL SYSTEM AND PIPES CHECK FOR LEAKSConnect the negative battery terminal.